HDAT2 7 6 (ALL-IN-ONE BOOT Version)

• Cultus26

  Posts 249755

  Joined: Wed Sep 03, 2025 10:27 pm

  Mon May 25, 2026 7:59 am

  HDAT2 7 6 (ALL-IN-ONE BOOT Version)
  
  
  
  Download Link
  
  https://rapidgator.net/file/561c3d8b138 ... en553r.rar
  
  General:

  Name: HDAT2 7 6 (ALL-IN-ONE BOOT Version)
  Size: 7.01 MB

  Software:

  Requirements: N/A
  License: freeware
  Languages: English
  Author: HDAT2/CBL

  Code: Select all

  Author URL: https://www.hdat2.com/

  Description:

  Overview of HDAT2
  It is an all-in-one program that lets you test or diagnose ATA/ATAPI/SATA, SSD, and SCSI/USB devices. It will not execute in a DOS session under Windows.
  You should make a DOS boot floppy disk or CD/DVD, boot your system for it, and execute this program from that floppy disk or CD-ROM.
  
  Features of HDAT2

  • Fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay (DCO)
  • Device access with interrupt 13h, direct via ATA ports, with ASPI drivers
  • Detects ATA/ATAPI/SATA devices with on-board and add-on controllers
  • Detects devices on AHCI/RAID controllers (just only on ports 0-3)
  • Detects USB devices via USB ASPI driver or BIOS (if supported)
  • Detects SCSI hard drives via BIOS interrupt 13h or ASPI drivers
  • Other SCSI devices are detected via ASPI drivers only (must be loaded before)
  • With ASPI drivers, you will get more information about SCSI devices
  • Test and repair devices for bad sectors (so far, version 4.5.3 only)
  • Many different test functions for hard drives
  • Resize hard drives that support SET MAX ADDRESS/EXT (supports 28/48-bit LBA addressing modes)
  • Drive lock detection via security feature (Security Menu)
  • S.M.A.R.T. functions for ATA/SATA and SCSI drives only
  • Information about devices (ATA/ATAPI, BIOS interrupt 13h, ASPI, EDD)
  • Sector viewer for devices (also for USB, ZIP, and CD data discs)
  • To access the ATA/SATA CD/DVD drive, you don't need any driver or MSCDEX
  • Enable/disable some features for direct-access devices
  • Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of the hard drive)

  Technical Details and System Requirements

  • Supported OS: Windows 11, Windows 10, Windows 8.1, Windows 7
  • RAM (Memory): 2 GB RAM (4 GB recommended)
  • Free Hard Disk Space: 200 MB or more

  • Quote